Supports UHF band 920MHz
Product Feature
Small Formfactor
Elevator structure
The size of the printer is reduced by adopting an elevator structure that erases the sheet as soon as printing starts and starts rewriting the data of the RF tag immediately. Also, the output speed of the RF tag sheet is faster than the conventional configuration.
Printing speed
Due to the adoption of the elevator structure, the print time per sheet
during continuous output is 8 seconds or less (including read/write to
the RF tag: our test conditions). You can also output a set number of sheets
speedily.
Front operation
The buttons and message screens necessary for operation and the paper feed/paper discharge space are all integrated on the front side. Achieves excellent operability.
Compact design
The space required for installation is a compact design with about two A4 sheets vertically placed. This makes it easier to secure the printer installation location and at the same time makes effective use of the space around the printer.
Product Feature2
Feature 2: Energy saving
Energy saving design
By adopting a "new erasing device" with excellent thermal conductivity and thermal uniformity, power consumption is reduced by about 30% compared to the conventional method. It greatly saves running cost. (Ricoh research)
Product Feature3
Feature 3: Low price
Low cost design
The price of the printer itself is designed to be low by using general-purpose parts while maintaining the high level of function and performance. By reducing the initial cost, we will promote the introduction to production sites and supplier companies and contribute to the improvement of operational efficiency.
Specification
| Size | 220（W）×520（D）×294（H）mm | |||
|---|---|---|---|---|
| Weight | approx. 17.5kg | |||
| I/F | USB2.0 High Speed | |||
| Development tools | Provides DLLs for Windows 2000, Windows XP, Windows Vista, Windows 7, Windows 8, Windows 10 | |||
| Resolution | 300dpi | |||
| Printing Speed | 8 seconds or less/sheet *Ricoh test conditions |
|||
| Operability | Front operation | |||
| Power supply |
AC100V, 50/60Hz | |||
| Power Consumption | Standby: 40W or less, issuing operation: 410W or less | |||
| Supported media | Ricoh RECO-View series | |||
| Supported media size | 85 x 200 mm | |||
| Supported media thickness | 0.17mm | 0.38mm | 0.40mm | |
| Number of sheets fed | 300 pieces | 120 pieces | 120 pieces | |
| Number of output sheets | 150 sheets | 60 sheets | 60 sheets | |
| IC chip type | - | Higgs3(UHF) | I-Code SLIx(HF |
|
| Corresponding RF standard | HF band (ISO18000-3 Mode1) UHF band (ISO18000-6 Type C) *Compatible with 920MHz band |
|||
お気軽にお問合せください。
